How to Find Motorcycle Keys

A motorcycle is an investment that requires careful monitoring. It doesn't matter if you're taking it to work or on your weekend getaway you'll want to make sure your bike is safe and secure.

This means you should have a spare set of motorcycle keys, in a place that you can find them easily. This isn't always feasible, though.

Lost Keys

If you're like most people are, it's not uncommon for your keys to go missing. It doesn't matter if traveling to work or conducting an errand, it isn't easy to locate your keys.

There are ways you can go about it that will reduce the chance of your keys being lost. These simple tips and tricks will help you to find your keys.

*Keep a spare motorcycle keys set of your keys in a safe place or in a drawer inside your house that is not frequently used, just in the event you lose one. Also, it's best to label each of your keys and put the keys with a note with their number and the location where they're kept.

Another way to protect your keys out of the reach of thieves is to attach the ring to a loop tied to your pant belt loop so you have an easy reminder of where they are. If you're on a long trip or just riding around a often, you could purchase a magnetic lock-a-key box to keep your keys in so that you don't have to worry about them getting lost.

To aid you in finding your keys, purchase a Bluetooth tracker to attach to your keychain. Make sure you secure the tracker with a belt that is sturdy and never leave it unattended.

If you are going to be away for a long time be sure to check all latches and locks for any damage or drops. This might include the gas tank lock or storage lock, or even your ignition switch, and if you notice something that isn't quite right, you might be considering hiring a motorcycle locksmith to repair it.

The most affordable method to obtain a replacement key is to bring the code that's on the cylinder for the ignition switch to your local locksmith. This is a 3 - or four digit code that's typically located on the left of the cylinder that controls the ignition. Once you have this code, your locksmith will be able look up the code on an index card and cut your new key.

Broken Keys

Broken keys on motorcycles could be the most hazardous incident that could occur while you're on the roads. You're ready for an enjoyable ride, but suddenly, you're unable get the engine started. You're left with no option to start your bike, regardless of whether your key is missing in the ignition cylinder, or your pocket is damaged.

There are a variety of ways to fix a key for your motorcycle that isn't working. The best option is to contact an experienced mobile locksmith who specializes only in locksmith services. A professional locksmith will be able to remove the damaged key from your ignition, look at the code for the key, and then cut a brand spare new key that will work with your bike.

Then, write down the key code for your motorcycle key programming. This is usually a small metal tab you can see on your key (the part you twist with your thumbs and forefinger). You should also capture a photo of it so that you can show it to the locksmith.

Next, you should contact a local locksmith to schedule an appointment. bring the key code along with you. Most locksmiths have tables or software that can be used to locate the key code on your bike, and cut a key that will fit.

Alternately, you can contact your dealer and ask them to send the blank key to you. Most dealerships have a lot of key blanks that they keep for the various year models and brands of bikes.

You can also buy an additional key blank online. It is important that you choose the right profile key blank for your year, make and model. If you purchase the wrong key blank, or spare one that is not the correct fit, your key will likely not function, and it could even damage the lock cylinder on your motorcycle.

A professional locksmith will assist you with all of these problems and other. They can provide the key you need at an affordable price and in a timely manner. In addition, they can replace the key with one that has the proper profile for your bike.

Lost Ignition Cylinder Code

There are several ways to replace the key on your motorcycle. First, if you are able to find the ignition cylinder's code, you can present it to a locksmith and get them to make a copy for you.

If you're not able to locate the cylinder code, it may be damaged or not present. It is recommended to contact an experienced locksmith via mobile phone to discuss your issue and get their help. They'll be able to determine if they are able to assist and, if they can what they'll require from you.

The ignition cylinder code is usually located on the shaft of the ignition key. You might need to remove the cylinder from the vehicle and then look for the code, however it must be visible and usually three to four digits long.

Also, make sure to examine your owner's manual as well as other documents that are associated with your motorcycle to find the ignition code for the cylinder. If it's not stamped in your manual for your motorcycle then you'll have to locate it and write it down.

Another method to obtain duplicate keys is to bring the entire ignition cylinder to a locksmith in your area. The majority of locksmiths will be able to make a key out of the cylinder. The drawback of this method is that it may be more expensive than the mobile locksmith or your dealer which is why you'll need be ready for a higher price.

Most modern motorcycles feature keys with chip technology that requires special programming in order to function properly. This means that if you lose the key you'll have to buy a new one and reprogramme it before your bike can start again.

This isn't a problem with most motorcycles. However, some bikes manufactured by top manufacturers such as Ducati will ship new with what's known as a "masterkey". If you lose that key, your bike won't start and will require a new ECU and an entirely new motorcycle keys key to function again.

A professional locksmith should be able cut a key from a cylinder with minimal difficulty. Most will have a reference table and software to aid in the process for them.

Ignition Cylinder Replacement

You will need to replace a broken key or damaged ignition cylinder. This is a crucial component of your vehicle that will help safeguard it from theft.

The ignition cylinder of your motorcycle is responsible for starting the engine and triggering the electronics that make the bike turn and run. The cylinder also regulates the ECU which is the electronic computer unit, of the bike. It's a complicated tiny, costly component that may malfunction from now to then.

It is imperative to replace your ignition cylinder prior to it fails , as it will prevent further damage to the ECU and possibly your whole motorcycle. There are a variety of ways to replace your ignition cylinder without having to buy a new one.

First, you need to take your cylinder to an locksmith. Most locksmiths can change your ignition cylinder without disassembling it. It's a little more expensive than some other alternatives, but it will be worth it for many people.

You can also buy an online replacement ignition cylinder. Make sure you have read the description thoroughly and ensure that it is the right type for you motorcycle. It is also important to know the year and make your motorcycle.

Be aware that certain cylinders may have anti-theft functions. This means that you may have to change the code of your ignition system, or the security systems in your vehicle to work with this new cylinder.

Ignition cylinders are very sensitive and are susceptible to breaking If you're not careful with them. To avoid debris entering your cylinder, be careful when handling it.

It is important to know the make and model of your motorcycle key lost before replacing the ignition cylinder. The price will vary according to the model of your security system and the vehicle. The cost of a new ignition cylinder may range between $10 and $1,000, and it's typically difficult for a home mechanic to determine how much it will cost.